Crafts Home & Garden

The Best Router Models to Match with Your Router Table

Without a doubt, routers are the most versatile tools in the workshop, being the go-to tools for a variety of woodworking projects. Thankfully, the once strictly handheld models are history, modern routers giving you the possibility to mount them to router tables. This offers more precise control over your woodworking projects, increased accuracy, and increased safety as well. But not all routers are designed for router tables. The best models allow bit changes and bit height adjustments from above the table. To see what the best router models that mount to router tables are, continue to read this article.

Bosch 1617EVS

The Bosch 1617EVS router is one of the best choices to go with for your router table, especially if you own the bosch ra1181 benchtop router table that is so versatile and practical that you can match it with a bunch of router models. The router is on sale for the price of $347. The fixed base of this unit comes with threaded holes which are used for easy mounting on the Bosch RA1181 benchtop router table or on any other table model. It features a powerful 2.25HP motor and offers you the possibility to monitor and maintain the desired RPM to have a consistent performance. The RPM of this model ranges between 8000 and 25000. The aluminum base and housing make it rugged and durable. Also, it’s backed by a 1-year warranty, and it comes with a 30-day money back guarantee.

Milwaukee 5625-20

Another top of the line router that will perfectly match your router table is the Milwaukee 5625-20 model. It can be yours for the price of around $350. It has an astounding 3.50HP motor that gives it impressive power. It features variable speed that can be set between 10000 and 22000 RPM. The linear depth adjustment system offers increased versatility. The machined aluminum housing and base ensure that this will be a long-lasting investment. In addition, it comes with a generous 5-year warranty.

Porter-Cable 690LR

Last but not least, we have the Porter-Cable 690LR router. This top of the line model can be yours for the price of around $140. The 11AMP 1.75HP motor gives it enough power to handle all of your woodworking projects. The single-speed motor delivers 27500RPM. It features a cam-lock lever that allows you to make simple coarse height adjustments. Also, it allows for easy motor release. In addition, the micrometer depth adjuster is impressively accurate. With it, there are no limitations to the woodworking projects you can take up.

Router Safety Considerations – Stay Away from Danger!

The right router installed in your router table can do wonders for the efficiency of your woodworking projects. However, there are safety considerations you must always keep in mind to stay away from sustaining serious injuries. Unfortunately, each year, hobbyists, as well as professionals, fall victims to injuries while woodworking as they do not take safety seriously. Instead of ending up in the hospital as a result of not paying attention when you work, continue to read and faithfully follow our advice to steer away from trouble.

Wear the Right Safety Gear

Regardless of the type of project you take up, considering the environment and tools you work with, it is crucial to wear appropriate safety gear at all times. The must-wear gear includes – safety goggles, ear protection, a dust mask, and tight-fitting clothes. As long as you make sure to never start woodworking without this assembly on, it is unlikely that you will succumb to any serious injuries or affect your health in any manner in the long run.

Be Careful in What Direction You Route

Make sure you always keep this advice in mind: never feed the workpiece with the rotation of the bit. It should always be fed against the bit’s rotation. Otherwise, the risk of injury becomes menacingly high as you lose control of the workpiece or router. As the router is mounted on the table, your workpiece should be fed from right to left past the bit.

Route in Series of Passes

When dealing with a wide dado, a large edge profile, or a deep groove, it is always safest to route in a series of passes. If you were to choose to route in a single pass, the heavy cut required would probably incur a violent kickback, resulting in you getting injured. Also, as you do this, tear-outs or splintering could occur as well. Thus, it is better to opt for light passes by reducing the cutting depth of the bit and increasing it slightly when subsequent passes are achieved.

Always Unplug before Servicing

Never service the tool, make adjustments, or change bits while the router is still plugged in. A slight moment of lacking attention could cause you big trouble, otherwise. Therefore, always remember to switch the router off and unplug it afterward before you tend to these maintenance work chores in order to stay safe. Also, make sure to plug it back in when you know you are done with the task at hand.

Leave a Reply

Your email address will not be published. Required fields are marked *